GGP - True Off Delay Timer

GGP - True Off Delay Timer

Main Image
Product Videos
Video
Description: True Delay Off Timer 

Details:  

  This is a true Delay Off timer and as such does not require an auxiliary power source to be maintained during the timing period. 
•TRUE DELAY OFF TIMER 
•6 VOLTAGE RANGES 
•6 ADJUSTABLE TIME RANGES
(covering from 0.3 seconds to 180 seconds)  




Selection:

For the product to suit your application please see the selection chart below or contact sales:
Use Filter menus to browse products - 1 Filter(s) Set
ProdRefSupply VoltageTime RangeOutput ContactsEnclosure Typeenclosure typeTiming Function
GGP1201add to basket110Vac0.3 - 3secs2 pole C/O5True Delay Off
GGP2201add to basket110Vac1 - 10secs2 pole C/O5True Delay Off
GGP3201add to basket110Vac3 - 30secs2 pole C/O5True Delay Off
GGP5201add to basket110Vac12 - 120secs2 pole C/O5True Delay Off
GGP6201add to basket110Vac18-180secs2 pole C/O5True Delay Off
GGP7201add to basket110Vac1 - 10mins2 pole C/O5True Delay Off
GGP8201add to basket110Vac3 - 30mins2 pole C/O5True Delay Off
GP4201add to basket110Vac6 - 60secs2 pole C/O5True Delay Off


Trip Delay Timer
Where fitted the ‘Trip Delay Timer’ will inhibit the output contacts from releasing immediately a fault is detected.
The trip delay time is adjustable up to either 10 or 30 seconds depending on the model and will be either a ‘Standard’ delay or a ‘True’ delay type.
The 'Standard' delay type will require around 50% nominal supply voltage to be maintained for its operation, in the case of a total loss of power the unit
will trip with a minimal delay of approximately 0.5 seconds. This type of timer will allow the unit to ride through a short term voltage dip but not a total
power loss.
The 'True' delay timer is not dependent on the supply voltage for its operation. The timing function will be available in the case of either a partial or total
supply failure. This type of timer will allow the unit to ride through either a short term voltage dip or a total loss of power lasting up to 30 seconds.
Power On Delay Timer
Where fitted, the ‘Power On Delay Timer’ will delay the output contacts from energising immediately the supply voltage is applied to the unit for a period
of up to 30 seconds.
The supply voltage will have to satisfy the conditions set by the supply monitoring relay for a healthy supply continuously for the ‘Power On Delay’ timing
period before the output contacts will energise.
If the unit detects a fault and releases the output contacts the supply voltage will once again have to satisfy the requirements of a healthy supply continuously
for the ‘Power On Delay’ timing period before the output contacts will re-energise.